Satellite Multiswitch System

BLANKOM BMS-0512C is a high-performance 1x Sat-Position Gateway device for digital TV broadcasting headend systems with ahigh end performance. Designed for the modern 19’’ rack mounting installations. This professional Multiswitch can be cascaded and is useful to grow with your demands. If more Receiver outputs are needed - simply add a second device in your 19’’Rack. (Up to 7 cascading devices in one chain are possible). The LNB power can be set to ON or OFF to be almost flexible for the combination with non-powered devices like fibre optic LNB or similar optical transmitter –receiver couples like the BLANKOM BFT-44 (4x fibre transmitter) to BFR-44 /4x (Fibre receiver). LED’s are showing the actual status. Gain adjustments for all 4 SAT-IF Inputs (+ terrestrial) can be equalized. Designed to work and power even multiple LNB's connected (Single, Dual) in a mix to reach DVB-T-Station SAT receptions from multiple positions demanded like in France.

• Professional RF design for DVB IPTV and Digital Headend’s, Dual redundant power supplies
• LNB supply 13-18V, 13V-18V+22KHz and up to 2.5A in total, special versions available upon request
• QUAD LNB compatible, 950-2150MHz and 47-870MHz lossless sharp filter design
• Low power consumption, LNB powering ON/OFF selectable, Output port protection up to 100 Volts

This cost effective 19 inch 3U headend multiswitch family (9/17) is designed to overcome the problems of traditional multiswitch mounting in 19 inch environments:
Cascading up to 8 of these multiswitches allows flexible adaptation to larger building cabling (SAT/Terr)
Quad & Quattro LNB compatible (internal 22KHz Oscillator),DiSEqC support. Optimized RF design for the usage of DVB IPTV and Digital Headends by low power consumption, air circulation due to 2 separate fans.

• 950-2150MHz and 47-870MHz lossless sharp filter for each subscriber outputs
• Active TERR input (passive input available), LNB Voltage On/Off switch
• Low signal resistant due to high gain through the receiver outputs
• +4dB equalizer range for each RF output compensating slope, Tap loss 0,5dB , High isolation
• Active TERR input (passive input available), LNB Voltage On/Off switch
• Manual switching of the LNB supply voltage (cascades)
• Low input signal strengths are compensated by high amplification at the receiver outputs
• High RF isolation due to high quality direct F-connections on the boards
• Low current consumption due to new generations of SMD components
• LED indicators for each connected receiver port
• Uninterrupted air circulation through 2 separate fans
• Double industrial power supplies with high isolation have been used for fail-safe operation
• Overvoltage protection up to 100V at the receiver outputs

This cost effective 19 inch 3U headend multiswitch family (9/17) is designed to overcome the problems of traditional multiswitch mounting in 19 inch environments:
Cascading up to 8 of these multiswitches allows flexible adaptation to larger building cabling (SAT/Terr)
Quad & Quattro LNB compatible (internal 22KHz Oscillator),DiSEqC support. Optimized RF design for the usage of DVB IPTV and Digital Headends by low power consumption, air circulation due to 2 separate fans.

• 950-2150MHz and 47-870MHz lossless sharp filter for each subscriber outputs
• Active TERR input (passive input available), LNB Voltage On/Off switch
• Low signal resistant due to high gain through the receiver outputs
• +4dB equalizer range for each RF output compensating slope, Tap loss 0,5dB , High isolation
• Active TERR input (passive input available), LNB Voltage On/Off switch
• Manual switching of the LNB supply voltage (cascades)
• Low input signal strengths are compensated by high amplification at the receiver outputs
• High RF isolation due to high quality direct F-connections on the boards
• Low current consumption due to new generations of SMD components
• LED indicators for each connected receiver port
• Uninterrupted air circulation through 2 separate fans
• Double industrial power supplies with high isolation have been used for fail-safe operation
• Overvoltage protection up to 100V at the receiver outputs

BLANKOM's new stunning Optical Ftt-Living room System replaces traditional coax cabling in the age of modern fiber optic installations.
Up to 4 SAT-Positions directly serving centrally by BFM-1732C and corresponding wall-outlets as single or dual versions: BFR-01 or Dual = BFR-02

• Signal transport with fiber optic SC/APC single mode to wall sockets
• Up to 8 Cascades with each output Tap pass loss 0,5dB
• LNB on/off switch (off for cascaded units) and LED indicator of each Receiver output
• Active TERR input (also available as passive input)
• LNB supply feature 13V - 18V, Quad- & Quattro- LNB compatible
• High isolation industrial dual PSU’s
• Low power usage thanks to a new generation smd components
• Cooling control by 2 separate fans
• Level adjustments for the trunk outputs by single attenuators


• Compact size Outlet boxes: Single and Dual TV-SAT-Receiver connections
• SAT- / TV- Receiver sourced - no external PSU necessary
• SAT- Transponder Downstream Wavelength: 1550nm
• SAT-Signalling (13/18V, 0/22Khz, DiSEqC) via Return-Channel Upstream on: 1310nm
• SC/APC - standard optical connectors

This stunning cost effective BLANKOM SAT-MATRIX is equipped with a Web-Interface which can be operated by a normal browser via an Ethernet IP connection – also remotely to flexible adjust and select every SAT-Input-port (incl. terrestrial pathway) to any of the 16 output ports to be routed or multiplied.
With the inbuilt RF-level monitoring circuit the user always gets the qualitative information about the signal and displayed in the web-interface. In parallel the LNC powering is monitored and shown. This Matrix comes with dual redundant power supplies for securing highest reliability. This high performance matrix operates fully autonomous and has been designed for modern 1RU 19’’ rack installations. This SAT/T(2) matrix is an ideal equipment for a flexible SAT/T distribution as a Headend-Input selection from max 4 SAT-positions. Even useful by using several units for the pre-selection of more than 4 SAT positions (incl. DVB-T/T2) to active or passive distribution equipment like splitter/taps or cascadable Multiswitch devices, it allows a flexible combination also for an almost complex SAT/T network serving multiple Signal-Input combinations

• 950-2150MHz and 47-870MHz
• Professional RF design for DVB IPTV and Digital Headend’s
• Dual redundant power supplies
• Web-Interface: Remote adjustment by an Internet Browser
• LNB supply 13-18V, 13V-18V+22KHz and up to 3,5A in total
• special versions w/o Network-Interface and with only 1 PSU available upon request
• Low power consumption
• Terrestrial passway included
• Low current consumption due to new generations of SMD components

1 SAT-Position redundancy Switching unit for highest signal availability
Redundancy in a professional HeadEnd is wasteless until the source of all your SAT-Input Signals has no Redundancy at all. Imagine a heavy weather condition above your SAT-dish farm... needless to say the SAT-RF Signal from the Sky can be affected ... The solution: Using 2 SAT-dish farms kilometers away from each other and the backup location serves the redundant signals via fiber optical SAT-IF technology: You need to use an automatic system to change the bad signal to the backup - here is the solution:
This 19’’ 1RU rackmount automatic redundancy switcher is designed for serving up to 2 standard Quattro LNB’s as SAT A is the master and SAT B the backup source

• 950-2150MHz L-BAND
• Dual redundant internal high isolated industrial Power supplies
• Optimized RF design for the usage of DVB IPTV and Digital Headend’s
• Low power consumption, LNB powering
• Seamless automatic switching if 1 input level becomes weak: if less than 65dBμV
• Active level monitoring and internal low attenuation
• LED indicators for each In- and Outputs and PSU status
• Automatic and manually operation modes